![]() ![]() For the first coating, use setting-type compound. Skim-coating is done with drywall compound: a white, pastelike substance that is applied to drywall to cover joints, cracks, and nailheads. You will need to collect your tools and materials first. If the walls are firm with perhaps an occasional crack or hole, then you can skim-coat them. The remedy here is not a light surface coating, but replacing the loose sections with drywall. In this case it is only a matter of time before the plaster cracks and drops off in chunks. If the surface gives under slight pressure, it may mean that the plaster has broken loose from the lath keys behind. Test the condition of the wall first by pushing against it with your fingertips. Skim-coating can rescue a wall with numerous hairline cracks but cannot help a wall if the plaster is loose or unsound. The job, however, is time-consuming it will take three four days to skim-coat the walls of an average-sized room. It is a matter of troweling on the coating, then spreading it thin with a wide, drywall taping knife. ![]() Skim-coating does not require any arcane skills. Skim-coating can also be used to smooth a textured surface. The layers are so thin that even after applying several coats, the total thickness of all the layers together is less than an eighth of an inch. ![]() Skim-coating is the technique of applying thin layers of gypsum-based joint compound over the entire surface. The best way to restore the wall surface is by skim-coating it. PLASTER walls frequently develop a network of hairline cracks that are too narrow to be filled with patching plaster, yet they cannot be covered with paint. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |